Latest from People

57640139 / edenmanusphotography / dreamstime.com
obituary_photo_57640139__edenmanusphotography_drea
United Electric Supply Co.
united_electric1920
Crescent Electric Supply
scott_teerlinck_crescent_1920
Illustration 19276996 / dirk erck /Dreamstime.com
people_onthe_move_illustration_19276996__dirk_erck
Photo 57640139 / edenmanusphotography / Dreamstime.com
obituary_photo_57640139__edenmanusphotography_drea
Schneider Electric
schneider_olivierblum1920
Border States Electric
10451_2024_socialandnewspostgraphicaaronhughesmerg
Schneider Electric
jesuscarmona_schneider_1920

Life after incandescents

March 30, 2011
Okay, so my wife and I welcomed the garage-door repairman at 7 sharp this morning. We had called him out because the garage door opener had been intermittently stopping at random points and refusing to close. The problem was worst in the depth of winter. ...

Okay, so my wife and I welcomed the garage-door repairman at 7 sharp this morning. We had called him out because the garage door opener had been intermittently stopping at random points and refusing to close. The problem was worst in the depth of winter.

From our description of the problem, he suspected a broken solder on the circuit board, which would be a $150 replacement plus the service call. When he flipped down the cover to look inside, he noticed the 26W (100W equivalent) compact fluorescent lamp.

"Hey, you know, you probably should use a regular light-bulb, because sometimes these can cause problems," he said. So we grabbed an incandescent from inside the house and swapped them out. After that, the garage door opened and closed, opened and closed, with no hint of a problem. Yes, it was a $65 service call to tell us to replace a light-bulb that hadn't visibly failed.

Now, if I had thought about it, I might have figured it out on my own. I know some CFLs, especially older ones, have problems in cold weather, and I know an electronic ballast approaching failure can interfere with other electronics.

But the question this raises is, once the Energy Independence and Security Act of 2007 provisions eliminating incandescent lamps take effect, will I have to deal with Sid the Part-Time Pimp to buy bulbs for my opener on the black market? What other options are out there for this sort of application?